Martindale ET4500 PROMO

£0.00 ex. VAT
£0.00 inc. VAT

Martindale ET4500 PROMO

    • Includes all tests required to verify the safety of electrical installations
    • Same functionality and features as the ET4000


  • Three wire earth testing capability
  • Memory and download for documenting results
  • ET Link PC software for upload and download of installation details and test results
  • Includes FREE Martindale VT25 Voltage & Continuity Tester + Martindale LOKKITBASE Essential kit

CAT III 600V CAT IV 300V True RMS Free VC


Includes FREE Martindale VT25 Voltage & Continuity Tester + Martindale LOKKITBASE Essential kit.

The new ET4000 and ET4500 testers carry out all the tests needed to verify the safety of electrical installations in domestic, commercial and industrial wiring installations in accordance with latest BS7671 18th Edition Wiring Regulations published July 2018.

The testers simplify 18th edition testing by having the latest amendment 3 fuse tables for Zs values built-in together with red and green LED indicators for instant pass/fail results.

Everything about the ET Series has been designed to save time and make testing easier, from the capability to display all results from an RCD autotest on one screen to the inclusion of useful Help menus at the press of a button. Even the soft carry case has been designed to enable testing without having to unpack and repack the instrument every time.

On connection the testers carry out an automatic polarity and wiring check identifying potentially dangerous wiring faults in advance of any testing.

Fast, reliable high current and non-trip loop testing comes as standard together with a high level of input protection and a CAT IV safety rating. Both models include phase sequence indication and TRMS voltage measurement to cover every job and ensure voltage levels can reliably be measured in all applications.

In addition the ET4500 can be used to carry out 3 wire earth testing and has on board memory to store and download all installation test results for documentation. It is also supplied with low loss AA rechargeable batteries which can be easily recharged in the tester with the mains adaptor or optional in-car charger.

Both models are supplied with a full range of accessories including Martindale test leads with clips and prods all terminated with industry standard 4mm plugs. The slimline Martindale remote start probe with test button is included as standard allowing one handed measurement in those areas that are hard to reach.

Register your ET4500 to download the latest version of ET-Link PC Software.



Insulation test 50VDC, 100VDC, 250VDC,500VDC, 1000VDC
Ranges 19.99MΩ/99.9MΩ/199.9MΩ
Continuity test Short circuit current >200mA
Ranges 19.99Ω/199.9Ω/1999Ω
RCD test 10mA, 30mA, 100mA, 300mA,500mA, 1000mA.

Type AC, A, F, S

0.5, 1, 5 x I auto and ramp test

Ranges 40.0ms/max time
Loop Test Dual display (Loop Resistance of PFC)

High Current L-L L-N, Non-trip L-PE

Ranges 9.99Ω/99.9Ω/999Ω/9.99kΩ
Memory On screen recall

PC download/upload via USB

Voltage TRMS 0-550V

Frequency 9.99Hz/499.9Hz

Phase rotation

Earth Resistance Test 3-wire
Range 19.99Ω/199.9Ω/9999Ω
Complies with BS EN 61010-1



BS EN 61557

BS 57671:2018 18th Edition

BS EN 61326-1

Dimensions 230 x 103 x 115mm
Weight 1.3kg approx
Includes TL36 3 lead set RBG, TL207 mains lead set RBG, TL180 Remote probe, soft carry case and strap, quick start plus CD, calibration verification certificate, 6×1.5V AA low-loss rechargeables, mains charger